TX.Direct Spray-On 300ml

Features

The high performance waterproofer designed to enhance performance and revitalize the breathability of waterproof clothing with wicking liners. Easy to apply by hand, non flammable, PFC and aerosol free.

Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your jacket must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax TX.Direct^®.

Nikwax TX.Direct^® Spray-On is easy and quick to apply, and its highly Durable Water Repellency (DWR) develops on air drying. The need for tumble drying is removed, this saves energy and protects more vulnerable, older, garments from heat. Nikwax TX.Direct^® Spray-On has been specifically designed and optimized for breathable waterproof garments; it leaves a flexible water repellent treatment on individual fibres allowing moisture vapor to pass through, maintaining breathability. The spray-on application allows for direct treatment of areas which require it most (e.g. elbows and seams on jackets) and will not compromise the properties of internal wicking liners.

• Easy to use spray-on waterproofing for all breathable waterproof clothing with wicking liners.
• Adds water repellency to the areas that need it most and revives breathability without tumble drying.
• Enhances the performance of your gear, keeping you warmer and drier.
• Recommended for Gore-Tex^®, Sympatex^®, eVent^®, and all other waterproof fabrics.

How To Use: 

For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash^®. No need to dry item(s) before waterproofing.

Shake well before use. Follow garment care label instructions.

1. Protect working surface and lay clean wet fastened garment flat.
2. Hold bottle 6 inches (15cm) away from garment.
3. Apply evenly to outside of fabric.
4. Wait for 2 minutes. Remove any surplus product with a damp cloth.
5. Check carefully to ensure no areas have been missed.

Volume Guide: These volumes are approximate and depend on the condition of the fabric being treated. Jacket 8fl oz (250ml); rain/ski pants 5fl oz (150ml), onesie 13fl oz (400ml).