Home / Backcountry Ski Gear / ZGTP Forward Lean Mod
Close-up of Tecnica Zero G Tour Pro ski boot cuff in yellow and black showing the walk mode lever mechanism and spine attachment point where the Raide forward lean modification installs
Machined aluminum walk mode attachment component for Tecnica Zero G Tour Pro ski boots, showing angled mounting bracket with integrated pivot holes and hardware recesses
Raide

ZGTP Forward Lean Mod

Sale price$99.00
Edition:
Current
In stock

Free shipping over $100. Free return shipping except oversized items.

Pickup available at 415 North Lake Boulevard

Usually ready in 24 hours

Machined aluminum walk mode attachment component for Tecnica Zero G Tour Pro ski boots, showing angled mounting bracket with integrated pivot holes and hardware recesses

ZGTP Forward Lean Mod

Current

415 North Lake Boulevard

Pickup available, usually ready in 24 hours

415 North Lake Boulevard
Tahoe City CA 96145
United States

+15305836917

Need expedited shipping? Call us to request expedited shipping before purchasing.
"I prefer a bit more forward lean in my boots and I've noticed over the past several years that boots have become more upright. The forward lean on the Zero G Pro felt fine to me until I decided to try the Raide modification to get 3º more. It did not take long for me to realize that the new forward lean was far superior for me and put me in the stance that I prefer to ski in. If you prefer a little more forward lean in your boots, this is a fantastic option to get you there." - Veteran Ski Buyer Jeff Dostie

Features

This kit replaces the metal part that the walkmode lever of the Tecnica Zero G Tour Pro boot attaches to to give the boot more forward lean. It increases the forward lean 3 degrees. This boot has always been regarded as the boot that balances downhill and uphill performance, but where it has always lacked is its upright stance. This product finally fixes that.

You will be sent installation instructions via email once your order is confirmed! A couple of helpful notes —  it takes about 20-30 minutes to install and requires drilling out one rivet, but the boot is still compatible with the old piece once installed. Additionally, with regards to Step 2, our team has found that the soldering iron is the best option.

By purchasing this product you agree that this product is not eligible for returns and that Raide and Alpenglow Sports are not responsible for any injury from this product. Additionally, please note that this product is not developed in conjunction with Tecnica and installation will void out the warranty on your boot.

  • Machined out of 7075-T6 Aluminum
  • Increases forward lean by 3 degrees.
  • Adds 10g to boot weight.

Kit Contains:

  • 2 replacements for the walk mode attachment.
  • 2 steel barrel screws for the lever arm to attach to.
  • 2 shoulder screws and locking nuts to replace the attachment from the walk mechanism to the spine.

Technical Specs

"I prefer a bit more forward lean in my boots and I've noticed over the past several years that boots have become more upright. The forward lean on the Zero G Pro felt fine to me until I decided to try the Raide modification to get 3º more. It did not take long for me to realize that the new forward lean was far superior for me and put me in the stance that I prefer to ski in. If you prefer a little more forward lean in your boots, this is a fantastic option to get you there." - Veteran Ski Buyer Jeff Dostie

You May Also Like

Ask an Expert:

Phone

Available Mon-Fri: 10am - 6pm
Sat & Sun: 9am - 6pm

(530) 583-6917

Email

Email info@alpenglowsports.com
and we'll reply in 2 days or less.

In Store

415 N. Lake Blvd.
Tahoe City, CA 96145

Meet the Staff

Our Staff Picks blog tells stories about our staff and their favorite products of the season